I'm trying to add four/4 pictures to my dragon's bio: The first two/2 being male and female versions without clothing, and the second two/2 being male and female versions with clothing, but I can't quite figure out how to do that as just the dragon themself without any links.
Help Center
Ask questions and help others in this forum.
TOPIC | Pictures in Bio?
I'm trying to add four/4 pictures to my dragon's bio: The first two/2 being male and female versions without clothing, and the second two/2 being male and female versions with clothing, but I can't quite figure out how to do that as just the dragon themself without any links.
@phaythey
right-click the image and select "copy image link", then paste it in with the add image code. it should let you add an image without adding a link to it.
right-click the image and select "copy image link", then paste it in with the add image code. it should let you add an image without adding a link to it.
@phaythey
right-click the image and select "copy image link", then paste it in with the add image code. it should let you add an image without adding a link to it.
right-click the image and select "copy image link", then paste it in with the add image code. it should let you add an image without adding a link to it.
Imagining dragons...
Lucky -
- 
fanfiction writer and chronic daydreamer -
Lucky -
- fanfiction writer and chronic daydreamer -
@LouckyKoneko
I should have specified that I work on mobile... I did try copying the picture to clipboard to see if that would work, but it apparently it does not. Thank you, though, for responding!
I should have specified that I work on mobile... I did try copying the picture to clipboard to see if that would work, but it apparently it does not. Thank you, though, for responding!
@LouckyKoneko
I should have specified that I work on mobile... I did try copying the picture to clipboard to see if that would work, but it apparently it does not. Thank you, though, for responding!
I should have specified that I work on mobile... I did try copying the picture to clipboard to see if that would work, but it apparently it does not. Thank you, though, for responding!
@PhayThey
On mobile, tap and hold the image, select "Open Image in a New Tab," then copy the page URL from that new tab. That's the image URL!
On mobile, tap and hold the image, select "Open Image in a New Tab," then copy the page URL from that new tab. That's the image URL!
@PhayThey
On mobile, tap and hold the image, select "Open Image in a New Tab," then copy the page URL from that new tab. That's the image URL!
On mobile, tap and hold the image, select "Open Image in a New Tab," then copy the page URL from that new tab. That's the image URL!
 - |
Robin Nightmares they/them/theirs | FR Time +0 +[Wasteland Radio Hatchery]+ - - |
|
 - |
@NightmareJudge
I just tried it, and put the url into the image link, but it didn't work, it just showed the coding...
Thank you for responding, though!
I just tried it, and put the url into the image link, but it didn't work, it just showed the coding...
Thank you for responding, though!
@NightmareJudge
I just tried it, and put the url into the image link, but it didn't work, it just showed the coding...
Thank you for responding, though!
I just tried it, and put the url into the image link, but it didn't work, it just showed the coding...
Thank you for responding, though!
@PhayThey
You can paste BBCode between [b][ code] these boxes [ /code][/b] without the spaces to display all the code within as raw text. That allows us to see what you're working with and what's going wrong.
For reference, a proper image code should look like this:
[code][img] IMAGE URL HERE [/img]
EXAMPLE (w/ dressing room image)
[img]https://www1.flightrising.com/dgen/dressing-room/scry?sdid=1713500&skin=37099&apparel=9452,50754,37885,1709,32969,1748&xt=dressing.png[/img][/code][img]https://www1.flightrising.com/dgen/dressing-room/scry?sdid=1713500&skin=37099&apparel=9452,50754,37885,1709,32969,1748&xt=dressing.png[/img]
@PhayThey
You can paste BBCode between [ code] these boxes [ /code] without the spaces to display all the code within as raw text. That allows us to see what you're working with and what's going wrong.
For reference, a proper image code should look like this:
You can paste BBCode between [ code] these boxes [ /code] without the spaces to display all the code within as raw text. That allows us to see what you're working with and what's going wrong.
For reference, a proper image code should look like this:
Code:
[img] IMAGE URL HERE [/img]
EXAMPLE (w/ dressing room image)
[img]https://www1.flightrising.com/dgen/dressing-room/scry?sdid=1713500&skin=37099&apparel=9452,50754,37885,1709,32969,1748&xt=dressing.png[/img]
|
- |
Robin Nightmares they/them/theirs | FR Time +0 +[Wasteland Radio Hatchery]+ - - |
|
- |
@NightmareJudge
Am I perhaps using the wrong code? Because, while following your instructions of coping the link from a new tab, my code looks like this:
[img]https://www1.flightrising.com/rendern/350/801812/80181113_350.png?mtime=ZZK9EbJmzPQ[/img]
Should I copy the coding through the dressing room like yours is? Would that change anything?
@NightmareJudge
Am I perhaps using the wrong code? Because, while following your instructions of coping the link from a new tab, my code looks like this:
[img]https://www1.flightrising.com/rendern/350/801812/80181113_350.png?mtime=ZZK9EbJmzPQ[/img]
Should I copy the coding through the dressing room like yours is? Would that change anything?
Am I perhaps using the wrong code? Because, while following your instructions of coping the link from a new tab, my code looks like this:
[img]https://www1.flightrising.com/rendern/350/801812/80181113_350.png?mtime=ZZK9EbJmzPQ[/img]
Should I copy the coding through the dressing room like yours is? Would that change anything?
@PhayThey (misspelled my username!)
Image URLs need to end in the proper [b]file extension[/b] (.png, .gif, or .jpg) in order for the code to recognize it as an image. Some URLs, for one reason or another, have dummy text at the end of the link when copied. [b]Delete everything after the .png and it'll work.[/b]
However, since you're trying to post an actual dragon and not a Dressing Room/Scrying Workshop image, there's an easier way. You'll still need to do the 'new tab' trick for most images.
When viewing the dragon's profile, click on the [b]Share button[/b] (shown below) and copy the section labeled [b]"Widget."[/b] Pasting this into your forum post will create an automatic BBCode image that links back to the dragon's page!
[img]https://www1.flightrising.com/static/layout/scryer/button_sharemorphology.png[/img]
It'll look something like this:
[code][url=https://www1.flightrising.com/dragon/84523035][img]https://www1.flightrising.com/rendern/350/845231/84523035_350.png[/img][/url][/code][url=https://www1.flightrising.com/dragon/84523035][img]https://www1.flightrising.com/rendern/350/845231/84523035_350.png[/img][/url]
@PhayThey (misspelled my username!)
Image URLs need to end in the proper file extension (.png, .gif, or .jpg) in order for the code to recognize it as an image. Some URLs, for one reason or another, have dummy text at the end of the link when copied. Delete everything after the .png and it'll work.
However, since you're trying to post an actual dragon and not a Dressing Room/Scrying Workshop image, there's an easier way. You'll still need to do the 'new tab' trick for most images.
When viewing the dragon's profile, click on the Share button (shown below) and copy the section labeled "Widget." Pasting this into your forum post will create an automatic BBCode image that links back to the dragon's page!
It'll look something like this:
Image URLs need to end in the proper file extension (.png, .gif, or .jpg) in order for the code to recognize it as an image. Some URLs, for one reason or another, have dummy text at the end of the link when copied. Delete everything after the .png and it'll work.
However, since you're trying to post an actual dragon and not a Dressing Room/Scrying Workshop image, there's an easier way. You'll still need to do the 'new tab' trick for most images.
When viewing the dragon's profile, click on the Share button (shown below) and copy the section labeled "Widget." Pasting this into your forum post will create an automatic BBCode image that links back to the dragon's page!
It'll look something like this:
Code:
[url=https://www1.flightrising.com/dragon/84523035][img]https://www1.flightrising.com/rendern/350/845231/84523035_350.png[/img][/url]
|
- |
Robin Nightmares they/them/theirs | FR Time +0 +[Wasteland Radio Hatchery]+ - - |
|
- |
@NightmareJudge (So sorry! It's fixed now!)
That does work, but I might actually need to use Dressing Room/Scrying Workshop codes because I'm trying to do both male and female dressed and undressed pictures...
And thank you so much for all your help thus far!
That does work, but I might actually need to use Dressing Room/Scrying Workshop codes because I'm trying to do both male and female dressed and undressed pictures...
And thank you so much for all your help thus far!
@NightmareJudge (So sorry! It's fixed now!)
That does work, but I might actually need to use Dressing Room/Scrying Workshop codes because I'm trying to do both male and female dressed and undressed pictures...
And thank you so much for all your help thus far!
That does work, but I might actually need to use Dressing Room/Scrying Workshop codes because I'm trying to do both male and female dressed and undressed pictures...
And thank you so much for all your help thus far!
@PhayThey
Glad to help! Yep, it sounds like you want the Scrying Workshop for undressed dragon images, and the Dressing Room for dressed ones. Have fun!
Glad to help! Yep, it sounds like you want the Scrying Workshop for undressed dragon images, and the Dressing Room for dressed ones. Have fun!
@PhayThey
Glad to help! Yep, it sounds like you want the Scrying Workshop for undressed dragon images, and the Dressing Room for dressed ones. Have fun!
Glad to help! Yep, it sounds like you want the Scrying Workshop for undressed dragon images, and the Dressing Room for dressed ones. Have fun!
|
- |
Robin Nightmares they/them/theirs | FR Time +0 +[Wasteland Radio Hatchery]+ - - |
|
- |